Eclipse - Fujitsu Ten Car Stereo System E-iSERV User Manual

0

Out of 0 Ratings

Owner's of the Eclipse - Fujitsu Ten Car Stereo System E-iSERV gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 119
 
78
Various Settings
ATTENTION
To load data into the main unit, you have to
make a special folder. For detail information
about how to make the folder, refer to the E-
iSERV website.
Reading custom mode Data
(Custom Mode)
Values (PEQ, time alignment and crossover
setting values) can be adjusted in the custom
mode on the website. Adjust the values by
following the instructions provided on the E-
iSERV operational procedure screen, and
download the data to a CD-R or USB memory.
The mode will change to the custom
mode.
If there is no custom data, “NO DATA”
will be displayed.
ATTENTION
PEQ, time alignment, and crossover values
cannot be adjusted while the custom mode is
on. To adjust values, turn the custom mode off.
CAUTION
1
2
• Do not turn the ignition switch or
power to the main unit ON or OFF (or
remove the front panel of the main
unit) while data reading is in progress.
Data reading will be interrupted and
data may be damaged.
• Only the [VOL] button can be
operated while the system is reading
data.
1
Press the [SELECT] (Up/Down)
button to select Custom Mode.
2
Press the [ENTER] button.
3
Insert a CD-R or connect a USB
memory containing data.
4
Press the [SELECT] (Up/Down)
button to select ON or OFF.

   Find Your Products By Category