5.0
Owner's of the Eclipse - Fujitsu Ten Car Stereo System CD5100 gave it a score of 5.0 out of 5. Here's how the scores stacked up:
48
Various Settings
Switching the Sound
Adjustment Mode
The Menu Selection mode is activated.
The sound adjustment mode is
activated.
When the button is pressed, the
setting item changes as follows.
PEQ ↔ Position selector ↔ Cross over
↔ Non-fader phase ↔ PEQ ↔
Switches among the adjustment
modes.
ATTENTION
If returning to previous screen, press the [RTN]
button.
Parametric equalizer
adjustment (PEQ)
The PEQ setting mode is activated.
Setting a preset EQ
Any of the preset buttons is pressed,
the preset EQ mode changes as
follows.
ATTENTION
When BASS, MIDDLE and TREBLE values
are adjusted in audio control mode, CUSTOM
EQ will be updated. (Refer to page 44 for
details on audio control operation.)
Adjusting center frequencies and Q
curves
The three bands, Bass, Middle and Treble can be
adjusted and each band has frequency level and
Q curve to be adjusted. Narrow, Normal,
MidWide and Wide can be adjusted for Bass,
Normal and Narrow for Middle, and Normal for
Treble.
Each time the button is pressed, the
band changes in the following order.
BASS → MIDDLE → TREBLE →
1
Press the [CUSTOM/MENU] button
for more than one second.
2
Press the [SELECT] (Upper/Lower)
button to select the SOUND.
3
Press the [ENTER] button.
4
Press the [SELECT] (Upper/Lower)
button to select the setting item.
5
Press the [ENTER] button.
1
Press the [SELECT] (Upper/Lower)
button to select the PEQ.
2
Press the [ENTER] button.
1
Select any button, from [2] to [6],
and press it when PEQ setting
mode is activated.
Button Mode Description
[2] DEFEAT FLAT
[3] POWER
Low frequencies
emphasized
[4] SHARP
High frequencies
emphasized
[5] VOCAL
Mid frequencies
emphasized
[6] CUSTOM
Equalizer user
preset value
1
Press the [ENTER] button to select
the band to be adjusted.
Find Your Products By Category
Please Login
