5.0

Out of 1 Ratings

Owner's of the Eclipse - Fujitsu Ten Car Stereo System CD5100 gave it a score of 5.0 out of 5. Here's how the scores stacked up:
  • Reliability

    5.0 out of 5
  • Durability

    5.0 out of 5
  • Maintenance

    5.0 out of 5
  • Performance

    5.0 out of 5
  • Ease of Use

    5.0 out of 5
of 259
 
Names of controls and parts
17
III
Turning the power on and off
When the power is turned on, the state used
when the power was turned off such as CD and
tuner playback is restored.
When the vehicle has no ACC position on the
ignition switch, care is needed when turning off
the main unit. Follow Step 2 or Step 3 when
turning off the power.
The power will come ON.
ATTENTION
When the main unit's power is turned on for
the first time or if the battery terminals have
been disconnected because of a reason
such as vehicle maintenance and the power
is then turned back on, the main unit will
start up in FM1 mode. After this, the
broadcast stations will be searched for
automatically and stored in buttons [1] to [6].
The power will go OFF and the main
unit will be in Standby.
If you press the [SOURCE/PWR] button
again for more than two seconds, the
power will go completely off.
The power will go completely OFF.
ATTENTION
If a car is not equipped with an ACC position,
press the [SOURCE/PWR] button until the
[ACC OFF] is displayed.
Switching Audio Modes
Press the button to switch mode in the
following sequence:
FM/AM SIRIUS
*1
XM
*1
CD (MP3/WMA)
*2
CDC
*1
USB
*2
AUX
*3
iPod
*1
FM/AM
*1:Cannot be selected if the corresponding
device is not connected to the main unit.
*2:Not displayed if no disc is inserted.
*3:Cannot be selected if the AUX mode is not set
to ON. For details, refer to "Switching the AUX
mode on and off" on page 75.
ATTENTION
The currently selected audio mode is displayed in
the mode indicator in the upper left corner of the
screen. To the right of this display are the next
three audio modes that can be selected (when the
switching screen is set to normal - see page 19).
The following table shows the icon for each audio mode:
1
When power is OFF, press the
[SOURCE/PWR] button.
2
When power is ON, press the
[SOURCE/PWR] button until you
hear a beep (for more than one
second).
3
When power is ON, press the
[SOURCE/PWR] button until the
[ACC OFF] is displayed.
1
Press the [SOURCE] button for
less than one second.
Icon Audio mode
CD
MP3/WMA
USB
FM/AM
AUX
CD changer
XM
SIRIUS
iPod
Current audio mode
Audio modes that can be selected