Atlantis Land Security Camera A02-IPCAM4-W54 User Manual

0

Out of 0 Ratings

Owner's of the Atlantis Land Security Camera A02-IPCAM4-W54 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 85
 
NetCamera NVW
A02-IPCAM4-W54 64
Question Why does the Link LED not light up properly?
Answer
• There might be a problem with the network cable.
To confirm that the cables are working, PING the
address of a know device on the network. If the
cabling is OK and your network is reachable, you
should receive a reply similar to the following
(…bytes = 32 time = 2 ms).
• The network device utilized by the IP Wireless
Security Night Vision
Camera is not functioning
properly such as hubs or switches. Confirm the
power for the devices are well connected and
functioning.
The wireless connection might be at fault. In ad-hoc mode
make sure the IP Wireless Security Night Vision
Camera
wireless channel and ESS-ID is set to match the PC/Notebook
wireless channel and ESS-ID for direct communication. Under
infrastructure mode make sure the ESS-ID on the
PC/Notebook and the IP Wireless Security Night Vision
Camera must match with the Access Point＇s ESS-ID.
Question Why does the IP Wireless Security Night Vision Camera
work locally but not externally?
Answer
• Might be caused from the firewall protection. Need
to check the Internet firewall with your system
administrator.
• The default router setting might be a possible
reason. Need to double check if the configuration
of the default router settings is required.

   Find Your Products By Category