0

Out of 0 Ratings

Owner's of the Agilent Technologies Computer Hardware U2802A gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 81
 
Getting Started 1
Agilent U2802A 31-Channel Thermocouple Input User’s Guide 11
i. If Agilent IO Libraries Suite version 14.1 or lower has been pre-installed
If you have Agilent IO Libraries Suite version 14.1 or lower installed on
your PC, you are required to uninstall the IO Libraries Suite.
1 To perform uninstallation, go to Start > Control Panel > Add or Remove
Programs. The Add or Remove Programs window will appear. Select
Agilent IO Libraries Suite 14.1 or lower version.
2 Click Change/Remove and select Remove when the instructions on the
screen prompted to proceed uninstalling the IO Libraries Suite
version 14.1 or lower from your PC.
3 Proceed to C. Install the Agilent IO Libraries Suite Version 14.2 or Higher.
ii. If Agilent IO Libraries Suite 14.2 has been pre-installed
If you have the IO Libraries Suite 14.2 pre- installed on your PC, skip Step
C and proceed to D. Install the DAQ Hardware Driver.
iii. If Agilent IO Libraries Suite is not installed
If you do not have IO Libraries Suite installed on your PC, go to C. Install
the Agilent IO Libraries Suite Version 14.2 or Higher.
C. Install the Agilent IO Libraries Suite Version 14.2 or Higher
The Agilent IO Libraries Suite 14.2 is available in the Agilent
Automation- Ready CD that comes with the standard purchase of Agilent
U2300A Series USB Multifunction Data Acquisition Devices or U2802A
31- Channel Thermocouple Input.
NOTE
If you do not have the Agilent Automation-Ready CD, obtain the Agilent IO Libraries
Suite 14.2 or higher at http://www.agilent.com/find/iolib.
Ensure that you do not have any USB DAQ device connected to your PC during
installation of the Agilent IO Libraries Suite.
U2802A_UG.book Page 11 Tuesday, January 8, 2008 10:24 AM