Axis Communications Security Camera 209MFD User Manual

0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera 209MFD gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 50
 
9
AXIS 209MFD/MFD-R/MFD-R M12
Setting the root password
1. When accessing the camera for the first time, the
‘Configure Root Password’ dialog appears on the
screen.
Note:
Before you enter your password at this point, you can secure configu-
ration of the root password via HTTPS by creating a self-signed certifi-
cate. To do so, click the Create self-signed certificate... button in the
Create Certificate window, and then proceed as follows.
2. Enter a password and then re-enter it, to confirm
the spelling. Click OK.
3. The ‘Enter Network Password’ dialog appears. Enter
the User name: root
Note: The default administrator user name root is permanent and cannot be deleted or altered.
4. Enter the password as set in step 2 above, and click OK. If the password is lost, the camera must be
reset to the factory default settings. See Resetting to the factory default settings, on page 34.
5. If required, click Yes to install the AXIS Media Control (AMC). You will need administrator rights
on the computer to do this.
Accessing the camera from the Internet
Once installed, the camera is accessible on your local network (LAN). To access the camera from the Internet
you must configure your broadband router to allow incoming data traffic to the camera. To do this, enable
the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the
camera. This is enabled from Setup > System Options > Network > TCP/IP Advanced.
For more information, please see NAT tr
aversal (port mapping) for IPv4, on page 30. See also the AXIS
Internet Dynamic DNS Service at www.axiscam.net or, for
technical notes on this and other topics, visit the
Axis Support Web at www.axis.com/techsup
The Live View page
All the buttons described below may not be visible depending on how the Live View Page has been
customized.
The Video format drop-d
own list allows the video format on the Live View page to be
temporarily changed.
The manual Trigger
button can trigger an event directly from the Live View page. This
is configured from Setup > Live View Config > Layout.
The Snapsh
ot button saves a snapshot of the video image currently displayed.
Right-click on the video image to save it in JPEG format on your computer. This button
is primarily intended for use when the AMC viewer toolbar is not available.
If you have Video Format se
t to Motion JPEG, you can use the View Size buttons to
either reduce the image to 800 pixels in width or return the image to full scale. To view
the View Size buttons, Setup > Video & Image > Resolution must be set to greater than
800 x 600 pixels.
The AMC (AXIS Medi
a Control) viewer toolbar is available in Microsoft Internet Explorer only. It
displays the following buttons:
The Play/Stop button starts and
stops the live video stream.
The Snapsh
ot button saves a snapshot of the video image displayed. The Snapshot
function and the target directory for saving snapshots can be configured from the AMC
Control Applet in the Windows Control Panel (Internet Explorer only).

   Find Your Products By Category