0
Owner's of the Axis Communications Security Camera 209MFD gave it a score of 0 out of 5. Here's how the scores stacked up:
25
AXIS 209MFD/MFD-R/MFD-R M12
2. Enter a descriptive name for the event, e.g. Movement.
3. Set the priority - High, Normal or Low (see the online help).
4. Set the Respond to Trigger... parameters for when the event would be active, e.g. only after office
hours.
5. Select the trigger alternative from the Triggered by... drop-down list; select Motion detection.
Also select the required window and define if the alarm should be triggered when motion starts or
stops.
6. Set the When Triggered... parameters; define what the camera will do if there is an alarm - upload
images to an FTP server or send an e-mail notification.
7. Click OK to save the Event in the Event Types list.
Please see the online help for descriptions of each available option.
Note:
Up to 10 event types can be configured in the camera, and up to three of these can be configured to upload images. Files names
can be formatted according to specific requirements. See File Naming & Date/Time Formats online help.
Pre-trigger and Post-trigger buffers
This function is useful when checking what happened immediately before and/or
after a trigger, e.g. 30
seconds before and/or after the event. Check the Upload images checkbox under Event Types > Add
Triggered... > When Triggered ... to view more options. All uploaded images are JPEG images.
Include pre-trigger buffer - images
stored internally in the server from the time immediately preceding the
trigger. Check the box option to enable the pre-trigger buffer, enter the desired length of time and specify
the required image frequency.
Include post-trigger buffer - contains i
mages from the time immediately after the trigger. Configure as for
pre-trigger.
Note:
•Pre-trigger and Post-trigger buffers will be lost if the connection to the event server fails.
•The maximum length of the pre-/post-buffer depends on the video image size and selected frame rate.
•If the pre- or post-buffer is too large for the camera’s internal memory, the frame rate will be reduced and no
images will be uploaded. If this occurs, an entry is created in the unit's log file.
Continue image upload (unbuffered) - enables the upload of video images for a fixed length of time.
Specify the length of time for the uploaded recording, in seconds, minutes or hours, or for as long as the
trigger is active. Finally, set the desired image frequency to the maximum (the maximum available) or to a
specified frame rate. The frame rate will be the best possible, but might not be as high as specified,
especially if uploading via a slow connection.
Scheduled Event
A Scheduled event can be activated at preset times, in a repeating pattern on selected weekdays.
Configuration example:
1.
Click Add scheduled... on the Event Types page.
2. Enter a descriptive name for the event such as “Scheduled e-mail upload.”
3. Set the priority (High, Normal or Low).
4. Set the Activation Time parameters (24h clock) for when the event will be active; e.g. start
on Sundays at 13.00 with a duration of 12 hours.
5. Set the When Activated... parameters; define what the camera will do at the specified time; e.g.
send uploaded images to an e-mail address.
6. Click OK to save the Event in the Event Types list.
Please see the online help for descriptions of each
available option.
Find Your Products By Category
Please Login
