Axis Communications Security Camera 209FD/FD-R User Manual

0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera 209FD/FD-R gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 46
 
31
AXIS 209FD/FD-R
Resetting to the factory default settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web
page (as described in Maintenance, on page 29) or use the Control button, which is found inside
the camera
cover (see Overview, on page 6) as described below:
Using the Control Button
To reset the camera to the factory default settings using the Control Button:
1. Remove the camera’s cover.
2.
Disconnect the network to remove power.
3. Press and hold the Control button while reconnecting the cable.
4. Keep the Control button pressed until the Status Indicator color changes to amber (this may take
up to 15 seconds).
5. Release the Control button.
6. When the Status Indicator changes to Green (which may take up to 1 minute), the process is
complete and the camera has been reset. The unit will now have the default IP address
192.168.0.90

   Find Your Products By Category