0

Out of 0 Ratings

Owner's of the ACS Clothes Dryer ACS Clothes Dryer gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 63
 
Process Autotune Screen
Use the Process Autotune screen to start or stop autotune for the process heater. Also, values
can be manually entered, although this is generally discouraged. Autotune should be performed
on initial startup after installation, and any time a process change occurs that affects air flow
through the hopper. The values will change after a successful autotune. When autotune is in
progress, the banner message is displayed on this screen and “AT” indicators are displayed on
status screens.
Material Setup Screen
Use the material setup screen to make changes to the current material (recipe). Changing the
regrind percent will recalculate density, although density can also be manually entered. Press
the “Save” button to make changes permanent, otherwise changes will be lost when a new
recipe is selected or the dryer power is shut off. Press the “Copy” button to create a new recipe
using the current recipe as a template. Press the “New” button to create a new blank recipe.
Pressing the “New” or “Copy” button calls up the New Material Setup screen:
Controls 31