0

Out of 0 Ratings

Owner's of the ACS Clothes Dryer ACS Clothes Dryer gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 63
 
NEVER try to pull material out of the dryer with your hands while it is
running!
Before you start the dehumidifying dryer, check the following:
Remove all tools from the dryer;
Be sure no objects (tools, nuts, bolts, clamps, bars) are laying in the
area;
If your dryer has been inoperative or unattended, check all settings before
starting.
At the beginning of your shift and after breaks, verify that the controls and
other auxiliary equipment are functioning properly.
Keep all safety guards in place and in good repair. NEVER attempt to
bypass, modify, or remove safety guards. Such alteration is not only unsafe,
but will void the warranty on your equipment.
When changing control settings to perform a different mode of operation, be
sure selector switches are correctly positioned. Locking selector switches
should only be adjusted by authorized personnel and the keys removed after
setting.
Report the following occurrences IMMEDIATELY:
unsafe operation or condition
unusual dryer action
leakage
improper maintenance
NEVER stand or sit where you could slip or stumble into the
dehumidifying dryer while working on it.
DO NOT wear loose clothing or jewelry, which can be caught while working
on the dryer. In addition, cover or tie back long hair.
Clean the dehumidifying dryer and surrounding area DAILY, and inspect the
machine for loose, missing or broken parts.
Shut off power to the dryer when it is not in use. Turn the switch to the OFF
position, or unplug it from the power source.
Maintenance Responsibility
Proper maintenance is essential to safety. If you are a maintenance worker, you must make safety
a priority to effectively repair and maintain equipment.
Before removing, adjusting, or replacing parts on a machine, remember to turn off all electric
supplies and all accessory equipment at the machine, and disconnect and lockout electrical and
pneumatic power. Attach warning tags to the disconnect switch and air shutoff valve.
xi