0
Owner's of the 3D Connexion Gas Grill Tannoy gave it a score of 0 out of 5. Here's how the scores stacked up:
1. Introduction
The ultimate in sound quality for critical applications such as theatre, acoustic music venues and
houses of worship. For all applications where performance is the focus and the system should be so
accurate that it reinforces, but remains unobtrusive and acoustically transparent to the audience, the
V300 is the natural choice. The 12” SuperDual™ ensures the most even frequency response over a
wide coverage areain the medium size venues for which the Tannoy V300 is designed. In common
with the rest of the V series products the V300 features a foam covered mesh grill, aesthetically
essential for use in theatres and live performance applications.
The V300 comprises one 12 inch Dual Concentric driver in which the low frequency (LF) and high
frequency (HF) sources are coincidentally aligned to a point source, resulting in a smooth uniform
frequency response over a wide area of coverage either as a portable stand alone system or in a
multi-cabinet array. The sophisticated CAD designed waveguide combines 90 degree conical
dispersion and excellent acoustic impedance characteristics. As the system is a point source,
clusters and arrays have minimal lobing.
The asymmetric cabinet profile allows flexible and discreet installation. As a foreground system,
installation is made simple with a range of Secur-ET mounting hardware, designed specifically for the
V series – or the system can be flown using the integral M10 inserts.
For portable stage use the birch ply cabinet has a recessed carrying handle on the rear of the cabinet
and a blanking plate, which can be removed to install an optional pole mount. As a versatile low
profile stage monitor, the conical coverage pattern gives the performer greater freedom of movement
than allowed by conventional horn loaded designs. The V300 can be configured for both passive full
range or biamped operation, a full description is provided later in this manual.
2. Unpacking
Every Tannoy V300 product is carefully tested and inspected before being packaged and leaving the
factory. After unpacking your loudspeaker, please inspect for any exterior physical damage, and save
the carton and any relevant packaging materials in case the loudspeaker again requires packing and
shipping. In the event that damage has been sustained in transit notify your dealer immediately.
3.1 Connectors/Cabling
The V300 is fitted with 4-pole Neutrik Speakon connectors. Speakon has the following advantages
over EP and XLR type connectors: All terminations are solderless; this makes life easier at the time
of installation or when field servicing is required. Contacts will accept 6 sq. mm wire with an outside
diameter of up to 15mm and a current rating of 30 Amps. The pins of the 2 Speakon sockets
identified input/output on the rear of the input panel are paralleled within the enclosure. Tannoy has
adopted the conventional wiring standard for the V300 product :-
Mode Of Operation
Speakon Pin No. Passive Full Range Bi - Amp
1+ Full Range + LF +
1- Full Range - LF -
2+ No Connectors HF +
2- No Connectors HF -
For a worldwide list of Neutrik distributors see http://www.neutrik.com/
Find Your Products By Category
Please Login
