0
Owner's of the 3D Connexion Gas Grill Tannoy gave it a score of 0 out of 5. Here's how the scores stacked up:
12.4 SECUR ET – VEB Eyebolt
The Tannoy V300 loudspeaker can be flown with
high quality VEB M10 eyebolts with collar to
BS427
8:1984. The loudspeakers are equipped with
internal steel braces, which also double as the
flying points, and accept VEB M10 eyebolts.
To install the VEB M10 eyebolts remove the
original M10 counter sunk screws from the
locations you wish to install the VEB M10
eyebolts. Then replace these counter sunk M10
screws with the VEB M10 eyebolts. The M10
insert on the rear of the cabinet also accepts a
VEB M10 eyebolt and should only be used for
tilting the loudspeaker to the desired angle.
Important: It is imperative for safety reasons
that two eyebolts linked to two independently
fixed straps are used per cabinet. VEB
eyebolts should be installed into the relative
sides of the cabinet, and should NEVER be
installed on the top of the cabinet. Never
suspend one e
nclosure from another to form a
line array or cluster using these fittings.
The correct method is shown in figure 2.
Never attempt to use formed eyebolts i.e.
formed from a steel rod and bent into an eye.
Only use the outer fixing points on the top and
sides of the V300 cabinet for fixing eyebolts. The
inner two fixing points on each side of the cabinet
are for dedicated bracketry (VMY) only.
p r o f e s s i o n a l
p r o f e s s i o n a l
p r o f e s s i o n a l
p r o f e s s i o n a l
!!
FIG 1.
FIG 2.
Find Your Products By Category
Please Login
