0
Owner's of the BlueAnt Wireless Bluetooth Headset BLUEANT gave it a score of 0 out of 5. Here's how the scores stacked up:
ENGLISH
BlueAnt
11
10. Disconnect / Transfer: To disconnect the Z9i with the currently connect phone Click Volume and Volume together
once. This will also transfer an ongoing call to the phone.
11. Reconnect: To reconnect your phone to the Z9i, simply turn the Z9i ON. Or with the Z9i ON simply press the MFB
.
Alternatively, you can use the menu of your Bluetooth phone.
12. Mute/Unmute the microphone. Press and Hold Volume
for 3 seconds during a call.
13. Call Waiting*: While on a call and another incoming call appears, (beep tones dependent on your network) Press and
Hold Volume
and Volume together for 3 seconds. The current call will be placed on Hold and the incoming call
will be answered. To return to the held call, Click Volume
and Volume together again for 3 seconds.
14. Call Conference*: To add a held call to the current conversation, Press and Hold MFB
for 3 seconds
15. Disable/Enable the LED indicators: (for night time driving): When your headset is in idle or standby mode Press and
Hold Volume
and Volume together for 3 seconds. After turning the headset OFF and back ON, the LED Indicators
will be active again by default. Note the LED’s are turned OFF while a call is active.
16. Z9i Reset: If you have already Paired 5 devices to the Z9i it is not possible to pair another as the memory is full. If you
want to pair with another phone you must reset the headset. To reset the Z9i to factory settings; while in idle mode (not
connected to any device), Click Volume
, Volume and MFB together (3 buttons). The Z9i will refresh its
memory, delete all current pairing information and automatically go into Pairing mode (LED will fl ash Blue) ready to pair
with a new device.
* To use these functions, your phone/device must support the Bluetooth Handsfree Profi le.
The Bluetooth Headset profi le will not activate these features of the BlueAnt Z9i.
Find Your Products By Category
Please Login
