Applied Energy Products Ventilation Hood XX100T User Manual

0

Out of 0 Ratings

Owner's of the Applied Energy Products Ventilation Hood XX100T gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 2
 
A B
C
D
E
Do's and dont's
• Do read the entire instruction leaflet before commencing installation.
• Do install each fan with a double pole isolating switch.
• Do make sure the mains supply is switched off before attempting to make electrical connections or
carry out any maintenance or cleaning
• Don't install this fan in any window/panel which is less than 4mm thick.
Guarantee
Customers outside the UK - Contact your local distributor.
• UK – The fan is guaranteed against defects from the date of purchase.
• Please keep your purchase receipt.
Technical advice and service
Customers outside the UK - Contact your local distributor.
UK: Xpelair have a comprehensive range of services including:
• Free design service and technical advice on all aspects of ventilation from trained engineers.
• Service and maintenance contracts to suit all requirements.
• Xpelair Technical Hotline:- +44 (0) 8709 000430
• Xpelair Technical Faxline:- +44 (0) 8709 000530
Head Office, UK Sales Office and Spares
Applied Energy Products Ltd, Morley Way, Peterborough, PE2 9JJ England
Telephone: +44 (0) 1733 456789
Fax: +44 (0) 1733 310606
Sales/Spares Hotline: +44 (0) 8709 000420
Sales/Spares Faxline: +44 (0) 8709 000520
Part No. 567 2026 01
(Revision D)
Cleaning (recommended once a month)
A QUALIFIED ELECTRICIAN MUST CARRY OUT ALL
CLEANING.
1. Before cleaning, isolate the fan completely from the mains supply.
2. Remove the front cover by pressing the release catches located on
the sides of the unit with a 3mm screwdriver, whilst pulling the front
cover forward (fig. E).
3. To clean the front cover, either wipe it with a damp, lint free cloth or
wash it in warm soapy water. Thoroughly dry the front cover and refit.
4. Do not immerse the fan in water or other liquids to clean any other
parts of the fan.
5. Do not use strong detergents, solvents or chemical cleaners to clean
the fan.
6. Allow fan to dry thoroughly before use.
7. Apart from cleaning, no other maintenance is required.
XX100 / XX100P
XX100T

   Find Your Products By Category