0

Out of 0 Ratings

Owner's of the Acoustic Research Headphones AW880 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 24
 
7
1. Press the ON/OFF button on the back of each
speaker to turn it on. The POWER light on the
front of each speaker illuminates red while the
speaker is tuning to the transmitter. The POWER
light turns blue when the speaker is tuned to the
transmitter—you should hear sound coming from
the speaker now.
Note: If the speaker is not tuned or if the
transmitter is not connected properly, the POWER
indicator will not turn from red to blue. If this
occurs, please see the troubleshooting section of
this manual.
2. Adjust the volume on each speaker as desired.
3. Set up each speaker for mono or stereo operation.
a) Monaural operation: The monaural mode
(MONO) is recommended when using single
speakers separately. For monaural operation,
set the LEFT/MONO/RIGHT switch to “MONO”
on each speaker.
b) Stereo operation: Set the LEFT/MONO/RIGHT
switch to “LEFT” on the speaker located to the
left from the listener, and set the other speaker
to the “RIGHT” position.
Notes:
Each speaker automatically retunes if it loses
the transmitter’s signal. You can also press the
AUTOTUNE button on the back of the speaker to
retune the speaker at any time.
The transmitter turns off automatically if there is
no audio signal present for a prolonged period.
Interference in the form of static and/or distortion
can sometimes be heard. If this occurs, conrm the
transmitter/speaker adjustments and indicators. If
the problem persists, refer to the Troubleshooting
section of this manual.
Tuning the Speakers
Speaker Front View
Speaker Back Panel