0

Out of 0 Ratings

Owner's of the 2nd Ave. Coffeemaker Vehicle Immobilizer gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 8
 
Silencer products have been designed to provide the consumer with years of trouble-free operation.
This manual will provide reference for the operation and maintenance of your new Silencer vehicle
immobilizer system. Please, take a moment to read this manual so you will be familiar with the oper-
ation of your new system.
Automatic Arming
Once you have turned the ignition key to the “Off” position, your Silencer engine immobilizer will
become armed within 30 seconds. Upon arming, the device will emit 1 soft chirp. Restarting the
engine before 30 seconds will stop the timer and reset it.
Note: If your system was supplied with an “Automatic Disarm Transmitter”, you will need to leave
the vicinity of your vehicle (approximately 60 feet) before the automatic arming function will execute.
(Remaining in close proximity of your vehicle could prevent it from arming). The distance require-
ment may prevent you from hearing the soft arming chirp.
Disarm
Valet
On
Valet
Off
3-Button Transmitter
2
3-Button Transmitter:
When you return to your vehicle to start the engine, press the “Disarm”
button on the 3-button transmitter. When the system is disarmed, the device will emit 2 chirps
indicating it’s disarmed.
1-Button Transmitter: When you return to your vehicle to start the engine, press the transmitter
button. When the system is disarmed, the device will emit 2 chirps indicating it’s disarmed.
Manual Disarming
1-Button Automatic
Disarm Transmitter
1-Button Transmitter
1-Button Automatic Disarm Transmitter: When you return to your vehicle, at some point, between
a distance of approximately 60 feet and the time you insert your ignition key to start the engine,
the automatic disarm transmitter will disarm your system. Once disarmed, the device will emit 2
chirps. No action is required by the operator.
Note: In areas of high radio frequency noise, the automatic disarm function of the transmitter may
get blocked or interfered with and not disarm your system. In this event, press the transmitter but-
ton to perform a manual disarm.
Automatic Disarming (Automatic Disarm Transmitter Required)
Note: Depending on the type of consumer transmitter package your dealer provided you with, you
may have each one of the transmitters pictured above, or two of the same type transmitter. Confirm
this with your dealer.
8900-UM.qxp 5/11/06 2:32 PM Page 2